Enerscope Systems Inc.
 

Applications

Enerscope Systems Inc. ApplicationsEnerscope Systems Inc. provides advanced technology-based products that offer solutions to a multitude of applications in the oil & gas industry from the wellhead and downhole to refining and distribution.

 

Browse Our Applications:

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Amine Filtration

Amine FiltrationDesigned for elevated temperature and pressures for 10-50 micron performance. Self-cleaning units available.

 

 

 

 

 



Brine Filtration

Brine FiltrationSystems designed to remove sand and silt, as well as organics and other floatable debris. Designs available 100-800,000 bbld down to 1 micron.

 

 

Coke Removal

Coke RemovalNon-plugging and effective units with low pressure drops available in a variety of materials of construction.

 

 

 

 

 

 



Completions

Completions Single pass filtration systems for the removal of suspended solids from completion fluids.

 

 

 

 

 

 



Disposal Wells

Disposal WellsOne-stage and two-stage filtration systems available. Effectively removes solids to prevent plugging.

 

 

 



Downhole Pump Protection for PCP and ESP

Downhole Pump Protection for PCP and ESPA field pilot test of the Enerscope Pump Protection Desanders in the oil and gas industry was conducted by Renaissance Energy Ltd. in the well Cantuar Unit 121/16-21-16-17 W3M.  The test objectives were focused on determining the capability of the Pump Protection Desander to extend the run life of an Electric Submersible Pump system. 

Read More

 

 

 

Drilling

DrillingOffering secondary and final-phase filtration. Handles large up to 50,000 ppm of solids.

 

 

 

 

 

 



Fire Protection Systems

Fire Protection SystemsCompact systems for fine filtration and removal of solids.

 

 

 

 

 

 



Frac Water

Frac WaterSmall and portable to large multi-stage filtration systems available for effective filtration during the stimulation process.

 

 

FWKO Protection

FWKO ProtectionUnits designed for installation prior to FWKO and heater Treater. Remove unwanted solids and increase production without causing emulsions. Desanders installed have decreased maintenance by an average 400%. 

Read More

 

Heat Exchanger Protection

Heat Exchanger ProtectionUnits decrease fouling and accumulation, as well as chemical usage and downtime.

 

 

 



Jet Fuel Filtration

Jet Fuel FiltrationEnerscope series acts as a prefilter to existing downstream barrier and media filters.

 

 

 



Offshore Drilling & Production

Offshore Drilling & ProductionSystems available for all types of service and applications—from wellhead to potable water. Our weight and dimensions are the smallest on the market.

 

 

Offshore Production Platforms

Offshore Production PlatformsVarious production applications including wellhead desanding, (re)injection, and FWKO protection. Systems designed for every specification, materials and coatings (Monel, SMO 254, Super Duplex, Belzona, Skotchkote 134, etc.).

In 2008, Enerscope automatic self-cleaning screens were installed for seawater injection filtration system on board of a FPSO.

Read More

Oil Production

Oil ProductionUnits designed for installation prior to FWKO and heater Treater. Remove unwanted solids and increase production without causing emulsions. Desanders installed have decreased maintenance by an average 400%. 

Read More

 

Oil/Gas Fields

Oil/Gas FieldsUnits designed for installation prior to FWKO and heater Treater. Remove unwanted solids and increase production without causing emulsions. Desanders installed have decreased maintenance by an average 400%. 

Read More

Oil/Gas Treatment Plants

Oil/Gas Treatment PlantsHigh performance systems with consistent low pressure drops and flow rates.

 

 





Pipeline Flushing & Testing

Pipeline Flushing & Testing Filtration of source water, such as sea water used for rinsing a pipeline as a stage of the commission procedure. Systems are for removing large sand and silt as well as floatable and organic particle found in seawater. Skid systems up to 450,000 bbld.

 



Pre-Filtration

Pre-FiltrationDesander designed to remove sand and silt from intake water and produced water for use for injection wells. The Enerscope helps avoid extensive maintenance on final stage ultra-filtration before high pressure injection.

 



Primary Filtration

Primary FiltrationSystems capable of removing large and small solids, as well as heavy solids, concentration during an upset situation.

 

 



Process Cooling

Process CoolingLarge flow rate systems with automatic self-cleaning.

 

 

 

Produced Water Treatment

Produced Water TreatmentUnits designed for installation prior to FWKO and heater Treater. Remove unwanted solids and increase production without causing emulsions. Desanders installed have decreased maintenance by an average 400%. 

Read More

 

 

 

 

Pump Seal Protection

Pump Seal ProtectionVarious sized systems for removing solids that are abrasive and that cause premature seal failure and, ultimately, pump damage.

 

 

Reinjection Plants

Reinjection PlantsSearching for a lower-maintenance, more efficient filtration solution, the operations staff at the production company first installed the Enerscope Desander prior to the bag filters, intending to extend bag life and improve operating efficiency. After only one year in operation, the desander was found to be so efficient in removing sand from the produced water that the bag filter system could be completely eliminated.

Read More

SAGD

SAGDFiltering fresh source water, as well as recycled water and condensate, customized systems are created for specific needs.

 

 

 

 

 

 

Salt Dome

Salt DomeFiltration systems designed to remove sand and other suspended particles in return fluid before the waste tanks and for filtration of brine after the tanks down to 3 micron before being pumped to the waste wells. Stainless steel and coated units.

 

 

Secondary Recovery

Secondary RecoverySearching for a lower-maintenance, more efficient filtration solution, the operations staff at the production company first installed the Enerscope Desander prior to the bag filters, intending to extend bag life and improve operating efficiency. After only one year in operation, the desander was found to be so efficient in removing sand from the produced water that the bag filter system could be completely eliminated.

Read More

Subsea Production

Subsea ProductionDesanding and separation equipment for subsea filtration facilities for improved field recovery.  Removing sand from water the wellstream, re-injecting desanded water boosts the wellstream and reduces the receiving pressure at the topside production platform.

 

 

 

 

 

Tertiary Filtration

Tertiary FiltrationRemoval of fine particles from water that may affect discharge requirements or downstream reuse processes such as membrane separation. Filtration of produced water removes colloidal and larger particles fluid stream. Usually, suspended solids from less than 1 micron to 25 microns and larger are removed.

The Enerscope technology, used to replace sand filters and to reduce cartridge consumption, has been operating successfully for 5 years without any downtime or the need for maintenance.

Read More

Wastewater Treatment

Wastewater TreatmentWastewater equipment for reduction of chemicals and maintenance. Filtration Systems to handle and treat waste fluids for discharge directly into the environment meeting current and future legislation. Reduce, reuse and recycle.

 

 

 

 

 

Water Treatment

Water TreatmentEffective, low-cost filtration and pre-filtration better water treatment. Systems remove organic and in organic particles. Automatic self-cleaning filters prior ion exchange demineralization/RO systems and quench water.

 

 

Waterflood Injection Protection

Waterflood Injection ProtectionA variety of automatic filtration systems with greater efficiency, lower pressure loss and reduced maintenance than traditional barrier filters. Also protects oil/water hydrocyclone by removing abrasive sand from produced water used for injection well. Installed upstream or on the discharge of injection pumps, desanding equipment and polishing filters helps maintain the porosity and permeability of the underground formations for optimum oil recovery operations.

 

Wellhead Desanding

Wellhead DesandingHighly effective filtration at the wellhead. Higher pressure desanders designed for low pressure drop and without erosion. Systems available for a fraction of the cost of traditional wellhead desanders and hydrocyclones. For operations where it is necessary to eliminate sand at the front end of the process. This protects downstream equipment from problems associated with solids.